Industrial Fuel Supplier for Southeast Florida Operations

Exigo Fuels is the industrial fuel supplier for heavy operations across Miami-Dade, Broward, and Palm Beach counties — manufacturing plants, cold storage and logistics hubs, data centers, hospital campuses, refineries, large construction projects, agricultural operations, government facilities, and marine terminals.

If your facility runs on industrial diesel, commercial diesel, bulk gasoline, or specialty fuels and you need a supplier that handles 1,000 to 50,000+ gallon single drops with SPCC-compliant procedures, ASTM quality documentation, and OPIS rack + margin pricing — we are the Southeast Florida answer. Dispatched 24/7 from our Hialeah base under US DOT# 4223712 and MC# 1635478. Call (305) 900-6725 for an industrial account setup call, or WhatsApp 786-395-6600 for scheduling coordination.

Industrial Fuel Supply — Scale, Reliability, Compliance

Industrial fuel supply is a distinct tier above standard commercial fuel delivery. Where a typical commercial customer might take 200–2,000 gallon drops against a small fleet or yard tank, an industrial buyer is sourcing bulk diesel and wholesale diesel for sustained operations consuming 5,000 to 500,000+ gallons per month across multiple tank systems, process equipment, and backup generator arrays. The requirements look different at every layer.

Scale means single-drop capacity from 1,000 gallons into a day tank up to multi-tanker coordinated deliveries of 50,000+ gallons into main ASTs. Exigo Fuels operates a tanker fleet sized for both ends of that range, with compartmented trucks that allow split loads of ULSD and off-road dyed diesel in a single trip when a facility runs both on-highway vehicles and off-road equipment.

Reliability means supply redundancy across multiple loading terminals — Port Everglades and Port Miami — so a single-rack outage never stops your dispatch. It means DOT-compliant drivers with current HAZMAT endorsements, tankers placarded per 49 CFR Part 172, and GPS-tracked fleet vehicles that let dispatch give an accurate ETA to your plant control room.

For industrial operations where a fuel-out condition shuts down a production line, a data center, or a hospital wing, reliability is not a nice-to-have — it is the core product.

Compliance is the layer that separates industrial fuel suppliers from smaller delivery services. Industrial accounts require SPCC (40 CFR Part 112) alignment, EPA/OSHA-adjacent procedures, ASTM batch documentation, IRS §4082 paperwork on dyed fuel, Florida Department of Revenue fuel-tax treatment, and coordination with the facility's own environmental, health, and safety team. Every Exigo Fuels industrial delivery ships with the documentation trail industrial auditors expect.

Industrial Verticals We Supply

The industrial fuel supplier role looks different depending on the facility type. Exigo Fuels serves the full Southeast Florida industrial spectrum:

• Manufacturing plants: food processing, beverage bottling, packaging, metal fabrication, and light-industrial assembly. Typical programs cover boiler fuel, process-heat diesel, forklift diesel, and backup generator tanks. Programs scale from 3,000 gallons per week up to multi-tanker weekly volumes for plants running 24/7 shifts. See manufacturing fuel programs.
• Cold storage and logistics hubs: temperature-controlled warehouses and distribution centers feeding Port Everglades, Port Miami, and MIA/FLL air cargo corridors. Reefer refueling, yard-tractor fleets, and generator banks sized for full-facility backup.
• Data centers: main-tank and day-tank programs for N+1 and 2N generator topologies. Scheduled top-offs maintain minimum fuel levels per NFPA 110 Level 1 and the facility's SLA commitments. Named-storm hurricane-prep fills precede landfall windows. See generator refueling.
• Hospitals and healthcare campuses: critical-infrastructure backup generator programs, boiler fuel, and sterile-processing ancillary equipment. Service includes documented fuel quality, spill response coordination with facility EHS, and priority scheduling ahead of named-storm activity.
• Refineries and chemical processing: intra-plant diesel for process equipment, forklift fleets, yard tractors, and backup power. Refinery accounts typically receive tanker-level drops 2–4 times per week with ASTM COA documentation on every load.
• Large construction projects: I-95 corridor megaprojects, Brightline expansion, airport construction at MIA and FLL, port dredging and terminal builds, and large vertical commercial and residential developments. On-site yard tanks, direct-to-equipment fueling, and off-road dyed diesel delivery for Tier 4 Final heavy equipment. See construction fuel services.
• Agricultural operations: western Palm Beach County sugarcane corridor, south Miami-Dade row-crop and nursery operations, irrigation pumps, and equipment barns. Bulk off-road diesel under IRS §4082 for non-highway use.
• Government facilities: municipal fleets, county public works yards, water treatment plants, wastewater operations, county/city garages, and emergency response staging sites. Government accounts receive specific contracting terms and documented compliance trails. See government fuel services.
• Marinas, ports, and marine terminals: commercial dockside fueling for workboats, tugboats, dredges, and commercial fishing fleets at Port Everglades, Port Miami, Port of Palm Beach, and the smaller commercial marinas. See hospitality and marine programs for hotel and resort marina operations.

Fuel Products for Industrial Operations

Industrial facilities rarely consume a single fuel product. Exigo Fuels delivers the full industrial slate across Southeast Florida:

• Ultra-low sulfur diesel (ULSD, ASTM D975 S15): the standard industrial workhorse. On-highway clear diesel for fleet tractors, yard tractors registered for road use, and any equipment operating on public roads. Full ASTM D975 spec — sulfur less than 15 ppm, minimum cetane 40, cold-flow additized for Florida conditions.
• Off-road dyed diesel (IRS §4082): the same ASTM D975 ULSD with Solvent Red 164 dye added at the terminal rack for tax-exempt non-highway use. Standard for generator main tanks, construction equipment fueled on-site, agricultural pumps, marine vessels, and any equipment that does not touch public roads. Delivers at $0.24–$0.58/gallon below clear ULSD in Florida.
• Gasoline — 87 octane regular, 89 mid-grade, 93 premium: ASTM D4814 compliant, delivered to industrial fleet tanks, yard pumps, and private cardlock installations. Summer and winter RVP formulations per Florida seasonal regulations.
• REC-90 (recreational 90-octane ethanol-free): for marine engines, small equipment, and any industrial application where ethanol phase-separation risk requires non-E10 gasoline.
• Jet A: for qualifying industrial aviation accounts with appropriate fuel infrastructure. Coordinated through our MIA and FLL aviation-corridor dispatch.

We do not supply DEF (diesel exhaust fluid), residential heating oil, propane, or consumer retail fuel. Exigo Fuels is a commercial and industrial delivery operation — not a retail station, not a home heating service. For the full product catalog see equipment and fuel catalog.

Bulk Volumes — 1,000 to 50,000+ Gallons Per Delivery

Industrial bulk diesel and wholesale diesel volume sizing is the first conversation on any new account. Exigo Fuels handles the full industrial range:

• 1,000–3,000 gallons: day-tank fills, small generator top-offs, boiler day tanks, and smaller plant yard tanks. Typical cadence is 1–3 drops per week depending on consumption.
• 3,000–10,000 gallons: the mid-range industrial sweet spot. Main-tank refills at mid-size manufacturing plants, cold-storage hubs, standard data-center N+1 tank arrays, and government fleet yards. Single-tanker drops with compartmented options for split-product loads.
• 10,000–25,000 gallons: large industrial refills and refinery intra-plant programs. Often coordinated as back-to-back tankers on the same day to cycle through a main AST or UST array.
• 25,000–50,000+ gallons: large facility bulk fills, hurricane-prep top-offs across hospital and data center clusters, refinery and chemical-plant programs, and megaproject construction yard fills. Delivered through multi-tanker coordinated dispatch with a dedicated site coordinator.

Tank infrastructure we service includes aboveground storage tanks (ASTs) from 500 to 50,000+ gallons, underground storage tanks (USTs) with appropriate fill-and-vent configurations, day tanks on generator and boiler systems, skid-mounted jobsite tanks, and direct-to-equipment fueling where tank infrastructure is not yet in place. See bulk fuel delivery and fuel wholesale for program structures.

Industrial Delivery Infrastructure

Delivering industrial fuel at scale is a logistics-plus-compliance operation, not just a truck with a tank. Exigo Fuels operates the infrastructure industrial accounts require:

• Tanker fleet: dedicated compartmented tankers for split-product loads (ULSD plus dyed off-road in a single trip), single-product tankers for large straight-grade drops, and smaller straight trucks for tight-access urban industrial sites. All placarded per 49 CFR Part 172 with current inspection paperwork.
• GPS tracking: live fleet tracking feeds into dispatch so we can quote accurate ETAs from Hialeah to your plant, data center, or jobsite — critical for operations where shift changes or tank low-level alarms drive timing windows.
• DOT HAZMAT-endorsed drivers: every driver carries a current Hazardous Materials endorsement, with ongoing refresher training on spill response, tank gauging, and emergency shutoff procedures.
• Spill prevention (SPCC, 40 CFR Part 112): every tanker carries spill response kits sized for the delivery volume, absorbent materials, and secondary containment equipment. Drivers coordinate with facility SPCC plans on arrival — verifying secondary containment, tank gauging before and after delivery, and emergency shutoff procedures.
• Dispatch and communications: 24/7 dispatch from our Hialeah base with named account coordinators for major industrial programs. Phone (305) 900-6725, WhatsApp 786-395-6600, or email for standing scheduling.

Commercial Terms — Net-10/15/30, OPIS Rack + Margin

Industrial fuel accounts run on business terms, not retail transactions. Exigo Fuels structures industrial programs around the accounting and procurement cycles industrial buyers expect:

• Net-10, Net-15, Net-30 terms: standard for approved industrial accounts following a credit application and reference check. Higher-volume accounts negotiate custom terms tied to projected monthly volume and payment history.
• OPIS rack + margin pricing: our pricing structure references daily Oil Price Information Service (OPIS) terminal rack pricing at Port Everglades and Port Miami as the transparent base index, with a disclosed margin per gallon that steps down at volume thresholds.
• Volume pricing tiers: margin rates tier down at 5,000 gallons per month and 15,000 gallons per month thresholds. Very-high-volume programs (refinery, large data center, multi-hospital-system) negotiate custom tier structures tied to annual projected volume.
• Fixed-price and indexed contracts: for industrial accounts that need budget-predictable pricing, we structure fixed-differential-to-OPIS contracts or period-locked pricing. This is a conversation at account setup, not a standard web-posted offer.

We do not quote prices on web pages. Daily rack movement at Port Everglades and Port Miami makes any posted number obsolete within hours, and industrial pricing is always specific to the account's projected volume, delivery geography, product mix, and contract structure. Call (305) 900-6725 for a current quote tied to your monthly volume and product mix.

Redundancy and Hurricane Prep

Southeast Florida's Atlantic hurricane season (June 1 – November 30) is the defining operational risk for any industrial fuel supplier serving the region. Exigo Fuels builds redundancy into the supply chain specifically for named-storm events and the more frequent tropical-system disruptions that never make the national news.

• Multiple rack sources: we maintain active loading accounts at Port Everglades and Port Miami terminals. Loss of a single terminal — whether from surge flooding, power outage, or supply-side interruption — does not stop our dispatch. Most smaller Southeast Florida fuel suppliers source from a single rack, which is a single point of failure during storm events.
• Priority contract scheduling: industrial accounts with signed hurricane-response agreements receive priority tanker capacity during named-storm cones. This is the core value of a standing contract — not the standard weekly delivery cadence, but the reservation of capacity when every facility in the tri-county is trying to top off tanks before landfall.
• Pre-storm top-off protocol: 72 hours before projected landfall, our dispatch proactively reaches out to critical-infrastructure contracted accounts — hospitals, data centers, water treatment, telecom — to schedule top-off runs while the rack is still open and drivers are still on the road.
• Post-storm restart prioritization: after landfall and terminal reopening, our dispatch restart sequence prioritizes critical-infrastructure contracted accounts before general commercial resumption.

See the hurricane prep fuel checklist for pre-season planning steps every industrial facility in Southeast Florida should have completed by May 31 each year. Industrial hurricane-response contracts must be in place before a named storm enters the cone — we cannot onboard emergency dispatch mid-event.

Compliance and Documentation

Industrial fuel supply lives and dies on the documentation trail. Regulated industrial accounts — hospitals, data centers, refineries, government facilities, federal contractors — cannot accept a delivery without the right paperwork, and a gap in the documentation chain shows up as an audit finding years later. Exigo Fuels industrial accounts receive:

• ASTM batch documentation: every load is traceable to a specific loading terminal, loading date, and batch. The bill of lading identifies product grade (ULSD S15, dyed off-road per §4082, gasoline grade with RVP) and origin rack.
• Quality Certificates of Analysis (COA) on request: for accounts that require loading-rack ASTM D975 COA documentation on every drop — sulfur, cetane, flash point, cloud point, water and sediment, cold flow — we coordinate with the loading terminal to include the COA as part of the delivery package.
• IRS §4082 dyed-fuel paperwork: every off-road dyed diesel delivery ships with the non-taxable-use documentation required for IRS compliance audits and Florida Department of Revenue fuel-tax treatment.
• Spill response documentation: drivers log tank gauging before and after delivery, verify secondary containment, and coordinate with the facility SPCC plan. Any incident — even a minor drip — triggers the documented notification and cleanup chain.
• EPA/OSHA alignment: we operate to standards that match industrial EHS expectations — DOT HAZMAT, 49 CFR Part 172 placarding, 40 CFR Part 112 SPCC, and OSHA-adjacent driver training on confined-space tank access (when relevant) and emergency procedures.

Industrial Account Setup — Site Survey to First Delivery

Onboarding a new industrial fuel supply account follows a structured sequence. The timeline depends on account size, but the steps are consistent:

• Initial call: 15-minute discussion covering facility type, estimated monthly volume, product mix (ULSD / off-road / gasoline / specialty), tank infrastructure, and delivery geography. Dial (305) 900-6725 or submit the contact form.
• Site survey and tank audit: our account coordinator visits the facility to inspect tank infrastructure, access routes, secondary containment, fill and vent connections, SPCC plan alignment, and any site-specific safety protocols (badge access, LOTO, confined space, hot work permits where applicable).
• Quote and proposal: we return a written quote tied to projected monthly volume, product mix, and delivery cadence. For large accounts the quote includes proposed contract structure (fixed-differential vs rack+margin) and recommended terms.
• Credit application: standard Net-10/15/30 terms require a credit application with trade references. Turnaround is 2–5 business days depending on reference responsiveness.
• First delivery: scheduled within 3–7 business days of credit approval for standing accounts. Large single-drop industrial first deliveries are scheduled to align with plant downtime windows or production cycles.
• Standing program activation: after the first 2–3 deliveries establish cadence and volume, we shift to a scheduled standing program with the facility's named account coordinator.

New industrial accounts onboard through scheduled delivery — not same-day or walk-in dispatch. Emergency 1-hour, 2-hour, and 4-hour response windows are reserved for contracted active accounts with documented service agreements. This is a structural policy across every industrial fuel supplier operating at scale in Southeast Florida, not a specific Exigo Fuels rule: emergency capacity is finite, and priority has to be reserved for the customers with documented commercial relationships.

Industries Compared — Industrial vs Commercial vs Consumer

The term "fuel supplier" covers three different operational tiers in Florida:

• Consumer / residential: retail gas stations, home heating oil, propane tank exchange. Not the Exigo Fuels category.
• Commercial fuel delivery: small-to-mid fleets, contractor yard tanks, small generator programs, typical 100–2,000 gallon drops with lighter documentation and weekly or on-demand cadence.
• Industrial fuel supply: single-drop volumes 1,000 to 50,000+ gallons, monthly volumes 5,000 gallons to half a million, full SPCC and ASTM documentation, OPIS rack + margin pricing with volume-tier structures, and standing hurricane-response agreements.

Exigo Fuels operates at both the commercial and industrial tiers. When a facility crosses the threshold — often around 5,000 gallons per month sustained, or whenever SPCC/ASTM documentation becomes an audit requirement — we shift the account onto the industrial program structure.

Industrial Fuel Supplier FAQ

What is an industrial fuel supplier?

An industrial fuel supplier is a bulk distributor that delivers diesel, gasoline, and specialty fuels directly to heavy-operations facilities — manufacturing plants, cold storage warehouses, data centers, hospitals, refineries, government sites, and large construction projects. Unlike retail stations or small commercial delivery services, industrial suppliers handle single-drop volumes from 1,000 to 50,000+ gallons, operate DOT HAZMAT tanker fleets, carry SPCC-compliant spill response plans, and provide ASTM quality documentation with every load.

How is industrial fuel supply different from commercial fuel delivery?

Commercial fuel delivery covers small-to-mid fleets and contractors, typically 100–2,000 gallons per drop with standard net terms. Industrial fuel supply is the tier above — sustained high-volume programs where a single facility burns 5,000–500,000 gallons per month across multiple tank systems, generators, and process equipment. Industrial accounts require documented supply redundancy, priority hurricane scheduling, OPIS rack pricing transparency, ASTM batch COAs on request, SPCC coordination, and terms structured around industrial accounting cycles.

What industrial facilities do you supply fuel to in Florida?

Exigo Fuels supplies industrial diesel and gasoline across Miami-Dade, Broward, and Palm Beach counties to manufacturing plants, cold storage and logistics hubs, data centers, hospital and medical campuses, refinery and chemical processing sites, large construction projects, agricultural operations in the western ag belt, government facilities, marinas and port operations, water treatment plants, and large generator arrays supporting critical infrastructure. Service extends from Homestead to West Palm Beach, dispatched from our Hialeah base.

What is the minimum volume for industrial fuel supply?

Industrial fuel supply accounts at Exigo Fuels start at 1,000 gallons per single delivery, with typical bulk drops running 3,000 to 10,000 gallons into aboveground storage tanks (ASTs) or underground storage tanks (USTs). We handle single-drop volumes up to 50,000+ gallons through multi-tanker coordination for refinery, data center, and hurricane-response operations. Facilities below 1,000 gallons per drop are served through our standard commercial fuel delivery program rather than the industrial tier.

Do you supply 24/7 industrial fuel for manufacturing operations?

Yes. Industrial manufacturing operations running 24/7 shifts receive scheduled standing-order delivery windows to match production cadence — typically weekly or bi-weekly bulk drops coordinated with plant shift changes and tank monitoring. Emergency 1-hour, 2-hour, and 4-hour response dispatch is available exclusively to active contracted industrial accounts with documented service agreements. New facilities onboard through scheduled delivery first — emergency response cannot be guaranteed for walk-in or first-time buyers.

Can you supply fuel for backup generators at hospitals and data centers?

Yes. Hospital and data center backup generator programs are a core industrial fuel supply vertical. Exigo Fuels services NFPA 110 Level 1 main tanks and day tanks with scheduled top-off programs that maintain minimum fuel levels per code, plus priority hurricane-prep fills before named storm landfall windows.

We deliver ASTM D975 ULSD (or off-road dyed diesel under IRS §4082 where the generator qualifies), carry quality COAs on request, and coordinate with facility engineers on tank access, spill containment, and fuel polishing schedules.

What quality documentation (COA/ASTM) do you provide for industrial fuel?

Every industrial fuel delivery ships with a DOT-compliant bill of lading identifying product grade, loading terminal, and batch. On request for regulated industrial accounts — hospitals, data centers, refineries, government facilities — we provide ASTM D975 Certificate of Analysis documentation from the loading rack, covering sulfur content (S15/S500), cetane number, flash point, cloud point, water/sediment, and cold flow properties. For gasoline loads we provide ASTM D4814 compliance documentation including RVP, octane, and ethanol content.

Do you have SPCC-compliant spill response procedures?

Yes. Exigo Fuels operates under 40 CFR Part 112 Spill Prevention Control and Countermeasure (SPCC) alignment with documented spill response procedures on every tanker. Drivers carry current DOT Hazardous Materials endorsements, spill kits per 49 CFR Part 172, and absorbent materials sized for the delivery volume. We coordinate with industrial facility SPCC plans on arrival — secondary containment verification, tank gauging protocols, emergency shutoff procedures, and incident notification chains. EPA/OSHA alignment is a baseline expectation.

How is industrial fuel pricing structured?

Industrial fuel pricing at Exigo Fuels is OPIS rack + margin, transparent and volume-tiered. Daily terminal rack pricing from Port Everglades and Port Miami serves as the base index, with a disclosed margin per gallon that steps down at 5,000 gallons per month and 15,000 gallons per month thresholds.

High-volume refinery, data center, and government accounts negotiate custom tier structures. We do not quote prices on web pages — daily rack movement makes posted numbers obsolete within hours. Call (305) 900-6725 for a current quote.

Can you supply industrial fuel during a Florida hurricane or major outage?

Yes — for contracted industrial accounts with priority scheduling in place before the storm. Exigo Fuels maintains multi-rack supply redundancy across Port Everglades and Port Miami, meaning loss of a single loading terminal does not stop dispatch. Named storm protocol prioritizes hospitals, data centers, water treatment, telecom, and critical infrastructure accounts with signed hurricane-response agreements. New customers cannot onboard emergency dispatch during a storm cone — the contract and tank survey must be in place beforehand.

Related Industrial Fuel Services

• Bulk Fuel Delivery — large-volume ULSD and gasoline drops
• Fuel Wholesale — wholesale diesel and gasoline programs
• Generator Refueling — hospital, data center, and critical-infrastructure generator programs
• Diesel Fuel Supplier Southeast Florida — sister page on diesel supply
• Fuel Supplier Florida — statewide fuel supply overview
• Off-Road Diesel Delivery — IRS §4082 dyed diesel for industrial off-highway use
• Equipment and Fuel Catalog — full product and equipment range
• Hurricane Prep Fuel Checklist — pre-season industrial planning

Industrial Fuel Delivery Service Area

• Industrial Fuel Delivery Miami — Brickell, Port Miami, MIA industrial corridor
• Industrial Fuel Delivery Fort Lauderdale — Port Everglades, FLL, marine corridor

Ready to Set Up an Industrial Fuel Supply Account?

Call (305) 900-6725 to start the industrial account setup conversation — 15 minutes to cover facility type, estimated monthly volume, product mix, tank infrastructure, and delivery geography. WhatsApp 786-395-6600 for scheduling coordination, or submit the contact form for a call-back within 2 business hours. Exigo Fuels — industrial fuel supplier for Southeast Florida, operating since February 1, 2023 from 7900 Oak Ln Ste 465, Hialeah FL 33016. US DOT# 4223712, MC# 1635478, 5.0 / 47 Google reviews.